What are the gate types in a drawer mold?

Jun 24, 2025

Leave a message

As a dedicated supplier of Drawer Molds, I've had the privilege of delving deep into the intricacies of mold design and manufacturing. One of the most critical aspects that often goes unnoticed by those outside the industry is the choice of gate types in a drawer mold. Gates play a pivotal role in the injection molding process, influencing the quality, efficiency, and overall success of producing drawer components. In this blog, I'll explore the various gate types commonly used in drawer molds, shedding light on their characteristics, advantages, and applications.

Sprue Gates

Sprue gates are one of the simplest and most straightforward gate types used in injection molding. They are essentially a direct connection between the injection molding machine's nozzle and the mold cavity. When the molten plastic is injected into the mold, it flows directly through the sprue gate into the cavity, filling it up.

One of the primary advantages of sprue gates is their simplicity. They are easy to design and manufacture, making them a cost - effective option for low - volume production or prototyping. Additionally, sprue gates allow for a large flow rate of molten plastic, which can be beneficial when molding large or thick - walled drawer components.

Store Plastic Products-(5)

However, sprue gates also have some limitations. After the molding process, the sprue (the solidified plastic in the gate) needs to be removed from the part, which can leave a visible mark or a small protrusion. This may require additional post - processing steps, such as trimming or sanding, to achieve a smooth finish. Moreover, sprue gates are not suitable for parts that require a high - quality surface finish or for applications where the gate mark cannot be tolerated.

Submarine Gates

Submarine gates, also known as tunnel gates, are a popular choice for drawer molds. These gates are located below the parting line of the mold and enter the cavity at an angle. When the mold opens, the gate is automatically sheared off from the part, leaving a relatively small and less visible gate mark.

The main advantage of submarine gates is the clean separation of the gate from the part. This eliminates the need for extensive post - processing, saving time and labor costs. Submarine gates also provide a more controlled flow of molten plastic into the cavity, which can result in better part quality and reduced internal stresses. They are particularly well - suited for drawer components that require a smooth surface finish and high dimensional accuracy.

However, submarine gates require more precise mold design and manufacturing. The gate size and angle need to be carefully calculated to ensure proper filling of the cavity and efficient gate shearing. If the gate design is not optimized, it can lead to issues such as gate blockage, incomplete filling, or excessive gate marks. Additionally, submarine gates may not be suitable for very thick - walled parts, as the small gate size can restrict the flow of molten plastic.

Pin - Point Gates

Pin - point gates are small, round gates that enter the cavity through a small hole. These gates provide a high - pressure and high - velocity flow of molten plastic, which is ideal for filling thin - walled drawer components. Pin - point gates are often used in multi - cavity molds, where they can ensure uniform filling of all cavities.

One of the key advantages of pin - point gates is the ability to achieve a very small and nearly invisible gate mark. This makes them an excellent choice for drawer parts that require a high - quality surface finish, such as those used in high - end furniture or electronic enclosures. Pin - point gates also allow for a more balanced filling of the cavity, reducing the risk of warping or sink marks.

On the downside, pin - point gates require a high injection pressure to ensure proper filling of the cavity. This can put more stress on the mold and the injection molding machine. Additionally, the small gate size can be prone to clogging, especially if the plastic material contains impurities or has a high viscosity. Regular maintenance and cleaning of the mold are necessary to prevent gate blockage and ensure consistent production.

Fan Gates

Fan gates are rectangular in shape and provide a wide and flat flow of molten plastic into the cavity. These gates are often used for large - sized drawer components or for parts that require a uniform filling across a wide area. The fan - shaped gate distributes the plastic evenly, reducing the risk of flow lines and ensuring a more consistent part quality.

The advantage of fan gates is their ability to fill large areas quickly and uniformly. They can be used to mold drawer components with complex geometries or with large surface areas. Fan gates also allow for a relatively low injection pressure, which can reduce the wear and tear on the mold and the injection molding machine.

However, fan gates leave a relatively large and visible gate mark on the part. This requires significant post - processing to remove the gate mark and achieve a smooth finish. Fan gates are also more difficult to design and manufacture compared to some other gate types, as the gate dimensions and the flow path need to be carefully optimized to ensure proper filling of the cavity.

Edge Gates

Edge gates are located at the edge of the part and provide a direct flow of molten plastic into the cavity. They are simple to design and easy to manufacture, making them a cost - effective option for drawer molds. Edge gates are suitable for parts with a simple shape and where the gate mark can be located on an area that is not critical for the part's appearance or functionality.

The main advantage of edge gates is their simplicity and low cost. They do not require complex mold design or manufacturing techniques. Edge gates also allow for a large flow rate of molten plastic, which can be beneficial for thick - walled drawer components.

However, edge gates leave a relatively large and visible gate mark on the part. Similar to sprue gates, post - processing is required to remove the gate mark, which can add to the production cost. Edge gates are not suitable for parts that require a high - quality surface finish or for applications where the gate mark needs to be minimized.

Conclusion

Choosing the right gate type for a drawer mold is a crucial decision that can significantly impact the quality, cost, and efficiency of the injection molding process. Each gate type has its own unique characteristics, advantages, and limitations, and the selection should be based on factors such as the part design, surface finish requirements, production volume, and cost considerations.

As a Drawer Mold supplier, I understand the importance of providing our customers with the best gate design solutions for their specific needs. Whether you are looking for a mold for a simple storage drawer or a high - end furniture drawer, we have the expertise and experience to design and manufacture a mold with the most suitable gate type. If you are interested in our Drawer Mold products or have any questions about gate types in drawer molds, please feel free to contact us for a detailed consultation. We also offer a wide range of related products, such as Storage Box Mould and Store Plastic Products. Our team of experts is ready to assist you in finding the perfect mold solution for your plastic household product manufacturing needs.

References

  • Rosato, D. V., & Rosato, D. V. (2000). Injection Molding Handbook. Hanser Gardner Publications.
  • Throne, J. L. (1996). Plastics Process Engineering. Hanser Publishers.