What are the common defects in storage box moulds and how to solve them?

Dec 12, 2025

Leave a message

As a seasoned supplier of Storage Box Mould, I've witnessed firsthand the challenges that come with manufacturing high - quality storage box moulds. In this blog, I'll delve into the common defects that can occur in storage box moulds and share effective solutions to address them.

1. Surface Defects

1.1. Flow Lines

Flow lines are visible lines on the surface of the moulded storage box. These lines are caused by the uneven flow of molten plastic during the injection - molding process. When the plastic cools at different rates, it results in these unsightly lines.

To solve this problem, we can adjust the injection speed. A slower injection speed allows the plastic to flow more evenly into the mould cavity, reducing the likelihood of flow lines. Additionally, increasing the mould temperature can help maintain a more consistent plastic flow, as warmer plastic has better fluidity.

1.2. Sink Marks

Sink marks are depressions on the surface of the storage box, usually occurring in thick - walled sections. They are caused by the shrinkage of the plastic as it cools. Since thick sections take longer to cool, the outer layers solidify first, and as the inner layers continue to shrink, sink marks are formed.

One solution is to modify the part design. Reducing the wall thickness in thick - walled areas can minimize the difference in cooling rates. Another approach is to adjust the packing pressure and time during the injection - molding process. Higher packing pressure can help fill the cavities more completely, compensating for the shrinkage.

1.3. Scratches

Scratches on the surface of the storage box can occur during the demoulding process or due to improper handling of the mould. These can affect the aesthetic appeal of the final product.

To prevent scratches, we can apply a high - quality surface treatment to the mould. A smooth and polished surface reduces the friction between the mould and the plastic, making demoulding easier and less likely to cause scratches. Also, proper training of the operators on handling the mould and the demoulding process is crucial.

2. Dimensional Defects

2.1. Shrinkage Variation

Shrinkage variation refers to the difference in the actual size of the moulded storage box compared to the designed size. Different types of plastic have different shrinkage rates, and factors such as mould temperature, injection pressure, and cooling time can also affect shrinkage.

To control shrinkage variation, we need to accurately select the plastic material based on its shrinkage characteristics. We can also use a shrinkage compensation formula during the mould design stage. During the manufacturing process, closely monitoring and controlling the process parameters such as temperature, pressure, and cooling time can help minimize shrinkage variation.

2.2. Warping

Warping is the distortion of the storage box from its intended shape. It is often caused by uneven cooling, internal stresses in the plastic, or improper gate location.

To address warping, we can optimize the cooling system of the mould. Ensuring that the cooling channels are evenly distributed and that the cooling water flow is uniform can help achieve more even cooling. Adjusting the gate location can also help balance the flow of plastic and reduce internal stresses. Additionally, annealing the moulded parts can relieve internal stresses and reduce warping.

3. Structural Defects

3.1. Short Shots

Short shots occur when the plastic does not completely fill the mould cavity, resulting in an incomplete storage box. This can be due to insufficient injection pressure, low melt temperature, or a blocked gate.

To solve short - shot problems, we can increase the injection pressure to ensure that the plastic can reach all parts of the mould cavity. Raising the melt temperature can improve the fluidity of the plastic, making it easier to fill the cavity. Checking and cleaning the gate to remove any blockages is also necessary.

3.2. Weld Lines

Weld lines are formed when two or more streams of molten plastic meet and fuse together during the injection - molding process. These lines can weaken the structure of the storage box and affect its appearance.

To reduce weld lines, we can adjust the gate location and number. By optimizing the gate design, we can ensure that the plastic streams meet at a more favorable angle and with sufficient pressure. Increasing the melt temperature and mould temperature can also improve the fusion of the plastic streams at the weld line.

4. Defects Related to the Mould Itself

4.1. Ejection Problems

Ejection problems can occur when the moulded storage box gets stuck in the mould during the demoulding process. This can be due to improper ejection mechanism design, insufficient ejection force, or excessive friction between the mould and the plastic.

To solve ejection problems, we can improve the ejection mechanism design. For example, using more ejection pins or a more evenly distributed ejection system can increase the ejection force. Applying a suitable mold - release agent can reduce the friction between the mould and the plastic, facilitating demoulding.

4.2. Wear and Tear

Over time, the mould can experience wear and tear, especially in high - stress areas such as the gate and the core. This can lead to dimensional changes and surface defects in the moulded parts.

Regular maintenance is the key to addressing wear and tear. We should inspect the mould regularly and replace any worn - out components. Applying a wear - resistant coating to the mould surface can also extend its service life.

767(2)

Conclusion

As a Storage Box Mould supplier, I understand the importance of producing high - quality moulds that can manufacture flawless storage boxes. By being aware of these common defects and implementing the appropriate solutions, we can ensure the reliability and quality of our products.

If you are in the market for Plastic Household Products or Bathroom Mold, and are looking for a reliable mould supplier, we are here to help. Our team of experts has extensive experience in dealing with various mould - related issues and can provide you with customized solutions to meet your specific needs. Contact us for procurement discussions, and let's work together to bring your product ideas to life.

References

  • "Injection Molding Handbook" by O. Olajide
  • "Plastic Mould Design and Manufacturing Technology" by Zhang San